Alpaca Fiber and Fleece: Properties, Grades and Uses

alpaca fiber

Wondering what makes alpaca fiber different from other fleece? It is classified by fineness, measured in microns, and judged for crimp, luster and handle. This guide walks you through each.

Item Value
Micron (unit of fineness) One millionth of a meter
ASTM Type T Extra Under 22.00 microns
ASTM Type T 22.00 to 24.99 microns
ASTM Type AA 25.00 to 29.99 microns
ASTM Type A 30.00 to 35.99 microns
ASTM D2252 status Withdrawn in 2018

These figures come from ASTM’s store page for D2252 and the Colorado State University Extension glossary, reviewed July 2025. Standards and glossaries can change, so check the source before you rely on the figures.

What is alpaca fiber?

Alpaca fiber is the fleece taken from an alpaca at shearing. Fleece is judged with a specific vocabulary, and the Colorado State University Extension glossary lists that vocabulary for alpacas alongside general wool terms.

The glossary distinguishes two fleece types by name. Huacaya fleece is judged on character, and Suri fleece on style, as later sections explain. The animals behind the fleece are covered in the guide to alpaca breeds.

A few basic terms from the CSU glossary help before going further:

  • Staple: a single lock of fiber.
  • Staple length: the average length of fiber in a fleece, measured from the skin to the tips of the individual fibers.
  • Architecture: the general structure and lay of fibers within the locks, which together make up the whole fleece.
  • Annualized weight: the clean fiber weight from an alpaca, adjusted for the time between shearings so that fleeces can be compared on a yearly basis.
An alpaca with long, hanging fleece stands on rocky ground.

Fineness and micron grades

Fineness is reported in microns. According to the CSU glossary, one micron is one millionth of a meter, and test results usually arrive with a standard deviation and a coefficient of variation. The glossary also defines coarse fiber simply as fiber of large diameter.

The ASTM specification D2252, listed on ASTM’s store page, classifies alpaca into types according to fineness. It puts Type T Extra at under 22.00 microns and Type T at 22.00 to 24.99 microns. Type X is given the same 22.00 to 24.99 microns band.

Coarser types follow in the same ASTM table. Type AA covers 25.00 to 29.99 microns and Type A covers 30.00 to 35.99 microns. Types SK and LP are each listed as over 30.00 microns.

ASTM describes the specification as a guide for production, preparation and marketing. The store page says it works by comparing the average fiber diameter of a measured specimen with the table, and the standard deviation can be compared with a separate table of averages.

One caution matters for dates. ASTM’s store page lists this edition of D2252 as withdrawn in 2018, so treat the bands as a historical reference rather than a rule that all sellers follow. A fuller breakdown of how grades are used sits in the guide to alpaca fiber micron grades.

Labels on yarn are a different matter from measured diameter. If you have seen terms such as baby alpaca, the guide to baby alpaca wool meaning looks at what they do and do not tell you.

Properties that define the fleece

Fineness is only one measure. The CSU glossary describes several qualities that judges, mills and buyers weigh together:

  • Crimp: pronounced corrugations in the entire fiber staple, occurring uniformly in the fibers of the staple in the same plain.
  • Character: the definition and evenness of crimp in huacayas; the crimp should be even and well defined from tip to butt.
  • Style: the wave or twist in Suri fleece, which indicates the fleece is not of a straight hair type.
  • Luster: the sheen, gloss or shine of the fleece, due to light reflecting off the smooth scales of each fiber.
  • Handle: the degree of softness of a fleece, which generally indicates fineness.
  • Prickle: the quality that causes itchiness when fleece is pressed against human skin.

Crimp and fineness are linked. The glossary notes that, usually, the coarser the fiber, the less crinkle it shows. In Suri fleece, wave and twist also give some natural elasticity.

Brightness is a separate term from luster: it describes the property by which fiber reflects light. Fiber that is medullated has a hollow core, and these true hair fibers are often called guard hair. The glossary adds that alpaca contains varying degrees of medullated or part-medullated fiber, which it describes as not undesirable.

Strength matters as well. Sound fiber is able to resist breaking during processing or when pulled by hand. Colour is a topic of its own, covered in the guide to alpaca fleece colors.

A black-and-white portrait shows an alpaca with curled fleece around its head.

Fleece zones, skirting and common faults

A fleece is not uniform across the body. The blanket is the back and side of a fleece, from the base of the neck to the base of the tail and from backbone to belly, including the haunches.

The glossary calls the best fiber the animal produces prime fiber. It is usually found in the blanket but can include the neck and upper thigh. The apron is coarse fiber forming an overcoat around the chest, and belly fiber is usually coarse too.

Skirting is the process of removing lower grade fiber, debris, dung and vegetable matter from a fleece in preparation for processing or showing. It is how the better zones are separated from the rest. How often animals are shorn is covered separately, for readers asking how often are alpacas sheared.

The glossary names several faults that lower fleece quality:

  • Cotted fleece: fleece that is matted together, which causes processing problems.
  • Second cuts: small pieces of short fleece remaining in the fiber, caused by shearing the same area twice.
  • Break: a weakening of fibers in the staple, allowing them to break under strain.
  • Open fleece: a type of fleece that does not hang together as a unit, usually lighter in weight and prone to debris.

Felting is defined in the alpaca terms as an irreversible tangling of fibers together. Fleece quality is only one part of keeping animals well, and the broader husbandry topics sit under alpaca care. For any health concern, consult a veterinarian experienced with camelids.

How does alpaca fiber compare with sheep wool?

The glossary has separate lists for general wool and for alpacas, which makes some contrasts visible. A detailed side-by-side is in the guide to alpaca wool vs sheep wool, and the points below stay with definitions.

  • Grading basis: for sheep wool, grade is a classification of grease wools based on hanks of yarn per pound of clean wool, expressed in spin counts. Alpaca types in the ASTM table are set by average fiber diameter instead.
  • Grease: lanolin is wool grease, a secretion from the sebaceous glands of the sheep skin.
  • Waviness: the alpaca terms tie crimp and crinkle to fineness, with coarser fiber showing less crinkle.

Both lists share the idea of micron measurement. The wording is identical in the general and alpaca sections, so the same unit applies whichever animal the fleece comes from.

From shorn fleece to finished fiber

The general wool terms describe shearing as removing wool from the animal with power clippers or blade shears. After that comes sorting and cleaning. Scouring is the separation of dirt, grease and foreign matter from grease wool, usually in a lukewarm, mildly alkaline solution followed by a rinse.

The glossary also names two processing systems. Worsted uses the longer length wools within a grade, while woolen uses the shorter ones. Noils are the short fibers removed during the combing process. The full sequence for alpaca is laid out in the guide to how alpaca fleece is processed.

Care continues after the fleece becomes a garment. Because felting cannot be reversed, handling method matters, and the guide to how to wash alpaca wool covers the practical side.

Several alpacas appear beneath the wooden roof of a barn.

Frequently asked questions

Which fineness types did ASTM use for alpaca?

Show answer

The older specification sorted fleece into types running from T Extra, the finest, down through T, X, AA and A. Types SK and LP were listed as coarser categories. All of them rest on average fiber diameter.

What is the difference between crimp and style?

Show answer

Crimp is the waviness of the fiber staple, and the term character describes how even it is in huacayas. Style is the equivalent idea for Suri fleece, describing a wave or twist rather than the crimp of a huacaya.

Does alpaca fiber itch?

Show answer

The glossary defines prickle as the quality in fleece that causes itchiness against human skin. It also says handle, the degree of softness, generally indicates fineness. It does not say how any one fleece will feel, so judge a fleece by touch and measurement together.

Who should I ask if a fleece looks weak or an animal seems unwell?

Show answer

Ask a veterinarian experienced with camelids. A weak or broken fleece can be described with fleece terms, but only a vet can diagnose a health problem, recommend treatment or deal with an emergency.